Ritmo Basic 355 Easy Life
Ritmo’s full-frame butt fusion machine for 4″–12″ (125–355 mm) HDPE and PPR-RCT pipe, with a logged report for every weld.
Check Availability →Rental Rates
Pricing shown is the standard rate. Tooling and inserts are configured per job and confirmed on your quote.
What it is
The Basic 355 Easy Life is the full-frame way to fuse 4″–12″ pressure pipe: a welded steel frame, four aluminum clamps, and two hydraulic cylinders with drip-free quick couplings. This is the machine you set up when the job is a long run of pressure pipeline and every joint has to answer for itself.
The Easy Life gearcase is the control center. It manages the welding cycle so joints come out precise and repeatable, and its internal memory works as a datalogger, with welds exportable as PDF reports. The system is Wi-Fi ready and pairs with the SET & GO PRO app.
SmartLock inserts lock and release without tools, the detach device triggers the heating plate release during the exchange phase, and with the drag bar configured the machine welds fittings and flange necks without any additional equipment. The Master 250 adapter runs Basic 250 model inserts.
Basic 355 Easy Life Specifications
| Working range | 125–355 mm; 4″ IPS – 12″ IPS |
|---|---|
| Power supply | 230V single phase, 50/60 Hz |
| Suggested generator | 8–8.5 kVA |
| Weld memory | 4,000 cycles, PDF export, Wi-Fi ready |
| Weight (standard composition) | 452 lb |
Power & Generator
The Basic 355 Easy Life runs on 230V single-phase power. Suggested generator: 8–8.5 kVA. Details are in our power and generator requirements guide.
Materials
The Basic 355 Easy Life fuses HDPE and PPR-RCT pipe.
Put the Basic 355 Easy Life on your job
Send us your pipe size, footage, and job dates. We will match the machine and tooling to your project anywhere in the western U.S.
Check Availability